FUJI Inverter 11Kw

FUJI

The FRENIC-Lift Series of exclusive AC Drives for operation of elevators are specially designed to have a number of improved features over previous elevator AC Drives, such as vastly lower torque ripple.We have incorporated the functions that customers find most necessary in elevator controls to provide an AC Drive that delivers performance that fits your elevator system.

Optimum Exclusive Design for Passenger Elevators

A braking circuit is built in the AC Drives of all the capacities.
Built-in PG feedback circuit is standard equipment.
An optional keypad is available.

Higher Performance

Overload capacity: 200% for 10s^*1)
Current response (ACR):500Hz
Reduction of torque ripple realizes low vibration.
Reduced roll-back during starting up.

*1) Except for 200 V / 22 kW and 400 V / 30 kW

High performance vector control

Current response (ACR): 500Hz
Speed control accuracy: ±0.01%

High overload capacity

200% of rated current for 10s^*2)
(Overload begins from 80% continuous operation with a carrier frequency of 10kHz.)
*2) Except for 200 V / 22 kW and 400 V / 30 kW

IM/PMSM common drive

A single AC Drive can control an induction motor (open/closed loop control) and a synchronous motor (the optional PG interface card is required).

Model variations

FRENIC-Lift AC Drives are available in a series with capacities ranging from 4.0 to 45kW for three-phase 400V model.
5.5 to 22kW for three-phase 200V model.
2.2kW for single-phase 200V model.

Applicable to the feedbacks from various pulse generators

Applicable to the inputs by open collector/complementary output as a standard specification (Encoder power supply is switchable between +12V and +15V.)
Applicable to the inputs from the 5V line driver as an option
Applicable to Sin/Cos, Serial interface (EnDat2.1) and Parallel interface (4-bit gray code, UVM 3-bit code)

Maintenance functions/Long life design

DC bus capacitor life: 7 years
Electrolytic capacitor life on the printed circuit boards: 7 years
Cooling fan life: 5 years
Life warning signal
Recording and display of cumulative operating time
Recording and display of cumulative operations

Globalization

Safety standards
EN61800-5-1:2003,
EN954-1 Category3
Sink/source switchable
RS-485 communications (Modbus RTU) is adopted as standard equipment.
CAN Bus is adopted as standard equipment.

Peripheral support tools (Option)

AC Drive support loader software is provided.
A multi-function keypad (with backlit LCD) makes it possible to copy or edit the function code data.

MADE IN JAPAN

CODE NO. 30060005

Reviews

There are no reviews yet.

Sign up for Newsletter